When it comes to installing a trailer hitch on your 1987 Mazda B Series Pickup we do have options for you but we do not have a direct fit hitch available. I recommend The Curt Class 5 Universal Weld-on Hitch w/ Brackets - 2 inch Receiver - 44 inch Wide # C99CR.
This hitch will have to welded onto your vehicle. The hitch has a black powder coat finish which resists rust and corrosion. I recommend checking your manual to know the proper towing capacity of your vehicle. This hitch will fit... view full answer...
The Westlake # LHAW165 uses a 175/80R13 size tire on a 13 inch silver mod steel wheel. It is a load range C which means it has a max load capacity of 1,360 lbs at 50 psi. It also has a speed rating of L which means that the max speed it can handle is 75 mph. The only other thing you will need to check is the bolt pattern. The Provider has a 5 on 4-1/2 inch bolt pattern so as long as that is what your current wheels use this is an excellent spare tire option. It also comes with a 5-year... view full answer...
You will need to check your owners manual or with the Mazda dealer to see if your 1999 Mazda B3000 Ext Cab can be flat towed. Some vehicles must be equipped with a transmission lube pump, an axle disconnect, drive line disconnect or free-wheeling hubs before they can be towed. If the correct procedure is not followed, it will cause severe damage to the transmission.
If you will be able to flat tow your vehicle, you will need a tow bar, base plate kit, safety cables, wiring, and a supplemental... view full answer...
We do not carry Reese base plates, and to my knowledge, they do not make them.
There is a tow bar adapter, # RM-025, available to allow you to use Roadmaster Baseplates with the Reese Tow Bar.
As you found, the base plate kit we have for your B2500 is part # 483-1. I assume the Reese Tow Bar you are wanting to use is part # 63180. You will need an adapter, part # RM-025, in order to get the Reese Tow Bar to mate with the Roadmaster base plates. Keep in mind that this tow bar is rated... view full answer...
If you're speaking of the rod and pad zip ties, we do indeed offer those as part # D13001. If you'd rather use metal strapping, you can use part # D13063 or the # D13002. For a neater appearance, Derale offers the # D50020 bracket kit.
For ease of use, the # D13001 would be your best bet. The rods will actually pass through the gaps between the radiator fins. view full answer...
Since you already have the # 37185 installed, you will need to hardwire the brake controller to the vehicle and to the 7-Way. What you will need is about 25 feet of # 10-2-1, a 40-amp circuit breaker, # PK54540, a circuit tester, # PTW2993, and a 20-amp circuit breaker, # PK54520, or 30-amp circuit breaker, # PK54530. (Use the 20-amp breaker if the trailer has 2 to 4 brake assemblies and use the 30-amp breaker if the trailer has 6 to 8 brake assemblies.)
With all of these parts you will... view full answer...
Go To Results